QuickLock is our extruded aluminum poly locking device. It is designed to provide an attractive and efficient method of securing either single or double layers of poly greenhouse film. The base is screwed onto the baseboard of your greenhouse, as well as the end arches if desired. Then, the poly is laid over the base, pulled down to remove wrinkles, and then the top cap is snapped into place. Over 300 lbs. holding power per lineal foot. The base and cap come in 10' lengths. The QuickLock is fastened to a wood baseboard with #10 x 1-1/4" tek screws. If fastening it to steel arches, such as around the end bow, use our #12 x 3/4" tek screws. To finish the job, you’ll need a rubber mallet to assist you in snapping on the top cap and a hex head bit for the tek screws. Contact us for more information on our aluminum greenhouse frame parts.
Call to Ship
Get News, Updates & Special Promotions